Einstein:      «Network»   ·   ROM Card   ·   ROM Reader   ·   Screen   ·   Serial Port

Setting up Einstein for Networking


Nov 2 2012


Prologue

As of this writing (nov 2nd, 2012) only Einstein for OS X supports Ethernet networking by emulating an NE2000 PCMCIA card. You will need the newest version of Einstein from code.google.com, the original US MP2100 ROM (717006), and some patience.

In return you will get a Netwon that has the correct time, connects to the Internet, and syncs with your Mac via NCX.


Set up Einstein

Download Einstein and put it in the Applications folder. Launch it. In the Preferences dialog, set the ROM path and the Flash path. Make sure the Network Driver is set to "User Mode". Your Newton should now boot up.


Installing packages

You will need to install a bunch of packages. Make sure that you install them in the right order, or you will get error messages when you plug in your Ethernet Card. Allmost all of the packages can be found on UNNA.

  • install the latest ROM patch 711000, relaunch Einstein
  • install NIE2's Internet Enabler (inetenbl.pkg)
  • install NIE2's Internet Setup (inetstup.pkg)
  • install NIE2's NewtonDevices (newtdev.pkg)
  • install NIE2's Ethernet Support (enetsup.pkg)
  • install the network card driver from the Einstein archive (NE2K.pkg), relaunch Einstein


Install the Ethernet Card

Click on the "Network" button in the Einstein toolbar. The "PCMCIA Ethernet" dialog should pop up.

Start "Internet Setup" and create a generic setup. Choose "manual" and set the IP settings to the same as you host computer. "Domain Name" can be left empty. As a card, choose the "PCMCIA Ethernet" NE2000 card from the menu.

If all this goes well, you are 90% there


Test the internet Connection

I assume that your host computer can go online. Now let's install a browser and see how far we can go:

  • install NTox 1.9 (NTox.pkg)
  • install ZLib 1.1 (ZLib.pkg)
  • install NHttpLib 3.5 (NHttpLib.pkg)
  • install Courier 1.1.1 (Courier.pkg)

Click on "Courier" , the click "->*" and enter a link to some simple HTML page, for example http://dillo.rti-zone.org/Html.testsuite/minimal.html

Courier will ask to open an internet connection, run through several dialogs, tell you that it is downloading the page. And after a minute or so, it will actually show the contents of that page. Wow. You are ready to browse the web (or whatever is left of it in HTML 1).


Docking and Synchronizing

Einstein can synchronize via NCX. Download the Dock TCP/IP installer package and add it to your Einstein setup. Install NCX 1.4 on your Mac (1.3 will NOT do!) and launch it. The start the "Dock" application on Einstein and select "Connect via TCP/IP".


Click on "Prefs", "Manual settings", and enter the IP of the machine that runs NCX.


Close the preferences dialog. Back in the "Dock" window, tap on "Connect". After a few seconds and two dialogs, the typical dock window with its six icons should pop up.

Awesome. You DID IT.

PS: I tried NCX Backup and NCX Export and they seemed to work. I have no clue if other things will work as well

PPS: if you relaunch Einstein at some point, remember that you need to put the PCMCIA Ethernet card back in (click the card icon).