• MatthiasM: Welcome to my Site!
  • EV Van: The Electric VW Van Project
    • Blog: Things as they happen
    • Plan: Page 1 - Making a Plan
    • Parts: 2 - Getting the Parts
    • Build: 3 - Putting it all together
    • Tests: 4 - Testing, testing, testing
    • Turn: Turning the car on the side
    • Inspection: Getting ready for inspection / TÜV
    • Drive: driving experiences / Fahrberichte
  • Software: Software Projects
    • FLTK: the Fast Light Tool Kit
    • Nao: Nao, a great humanoid robot from Aldebaran, France
    • Einstein: Emulation the Newton OS
      • Network: Einstein Network Setup
      • ROM Card: About the Newton MessagePad 2xxx ROM card
      • ROM Reader: Read and evetually write Newton ROM cards
      • Screen: a new Newton color screen
      • Serial Port: Emulating the Serial Port with EInstein
    • HomeMatic: Alternative Firmware for HomeMatic Devices
      • Aufbau: Anschliessen der Hardware und Aufbau der Programmierstation
      • Kleine Schritte: Die ersten Programmierschritte
      • Protokolle: Das ewige Hin und Her: Protokolle
      • Bootloader: Bequem und sicher: der Bootloader
      • Firmware: Die neue Firmware entsteht
  • Hardware: Hardware Projects
    • Laser: Laser Engraver
    • T-962A: T-962A Reflow Solder Oven
    • TVM802A: The TVM802 Pick and Place machine
      • Unboxing: Unboxing the machine
      • Setup: setting up the PC to run with the TVM802A
      • First PCB: Placing parts on my first PCB
      • Mods: Modifications
      • Hacks: Some reverse engineering for fun
      • Eagle ULP: Eagle CAD ULP script file
    • FilmScanner: Building a 16mm film scanner from scratch
    • ePump: EV Charging Fuel Pump
    • Classic CAN: an automitive CAN Bus system for classic cars
  • Vehicles: Car Projects
  • Archive: Old stuff that will never be touched again
    • Servo: An RC Servo Controller Board
    • 3D Print: Building the PWDR 3D Printer
      • Blog: Sequential Blog
      • 1: Pwdr Blog, Page 1
      • 2: Pwdr Blog, Page 2
      • 3: Building The Piston
      • 4: Building the Body
      • 5: Firmware
      • 6: Electronics
      • 7: HP Ink printhead
    • BFB Touch: How to ubgrade the BFB Touch 3D Printer
      • Rumba: Retrofitting the BFB Touch with a Rumba controller
      • The Solution: The final solution to the BFB Touch problems
      • Downloads: BFB Touch Downloads
- Impressum