Motor Support Design

Die Motorst├╝tze

This is how it has to look. The first iteration will be very simple, made from a 35mm x 2mm square tube, bolted onto the old ICE motor mounts. It will need to be cut and welded to get a very slight V shape to accommodate for the electric motor which is 30mm lower than the bar.

I picked up the square pipe and M8 bolts with self locking nuts and washers. I hope I will have a few minutes to put the welds in.

Oh, and it seems the motor coupler is on its way from Austria ­čśë

So muss sie aussehen. Die erste Version ist recht einfach, aus 35mm x 2mm Quadratrohr geschweisst und an die alten Motorst├╝tzen geschraubt. Der Motor sitzt 30mm tiefer als die alte Motost├╝tze, was ich mit einem leichten Knick ausgleiche.

Ahja, und die Wellenkupplung scheint auf dem Weg hierher zu sein! ­čÖé

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top